Since we got our Sandblasting Roatan capabilities upgraded with this machine, we’ve been asked a number of questions…
What is a blast cabinet/blasting cabinet/bead blaster?
It is a closed-loop abrasive cleaning system. In the cabinet there’s a loading area for the item to be blasted. At the bottom of the cabinet, you have the abrasive material used for cleaning (in this case, a medium-grit glass bead composite). Off to the side is a vacuum that sucks out the debris.
The operator puts his arms in the holes, and has a gun with a nozzle connected to two hoses, one for compressed air, and the other is a siphon hose going down to the material. The pedal connected to the compressed air hose activates the gun. Tw0 powerful lights and the vacuum allow the operator to see what’s going on inside. Blast, and remove!
What does a bead blaster do?
Short answer: removes rust/corrosion.
Longer answer…Still removing rust. The advantage of using a blast cabinet reduces the need, and thus the wear and tear on the other tools that would be required to achieve a similar result. A combination of 4 or 5 other specialty tools need to be used to achieve the same result. And often, the result just isn’t as good, because no other tool can get to the places that the beads are blasted to!
Here is the back side of an impeller before it goes in:
Here is the front side of the impeller after it came out:
Don’t hesitate to CONTACT US if you have any items that need to be de-rusted!
The Liquid Systems website is now officially launched! There has been some hard work behind the scenes, but it’s looking decent. Are you wondering what we actually do here? Each section of the website has a little bit more information about us. I’m sure there’s something you have that Liquid Systems can take care of.
In the mean time, the most recent addition to our shop is our TP Tools blasting cabinet! Bring us your rusty stuff and we’ll blast it clean!